Table of Contents
Advertisement
Safety
PREPARE FOR OPERATION
Read and understand all operating instructions and
precautions in this Service Manual before operating or
servicing the machine.
Know and understand the positions and operations of all
controls. Make certain all controls are in neutral and the
parking brake is applied before starting the machine.
Make certain all people are well away from your area of
work before starting and operating the machine. Check
and learn all controls in an area clear of people and
obstacles before starting to work. Be aware of the
machine size and have enough space available to allow
for operation. Never operate the machine at high speeds
in crowded places.
Emphasize the importance of using correct procedures
when working around and operating the machine. Do not
let unqualified persons operate the machine. Keep others,
especially children, away from the work area. Do not
permit others to ride on the machine.
Make sure the machine is in the proper operating
condition as stated in this Service Manual. Make sure the
machine has the correct equipment required by local
regulations.
All equipment has a limit. Understand the speed, brakes,
steering, stability, and load characteristics of this machine
and the tractor before starting.
OPERATION
General Information
FIG. 5: When parking, park the machine and the tractor
on a solid level surface. put all controls in neutral and
apply the tractor parking brake. Stop the tractor engine
and take the key with you.
Make sure the tractor and implement are in the proper
operating condition according to the operator manuals.
Make sure the tractor brakes and the machine brakes are
adjusted correctly.
The tractor must have enough weight and braking
capacity, especially when operating on roads and terrain
that are not even. Use a tractor of recommended size and
weight to tow the machine. See the Specifications division
in this manual for the minimum tractor size and weight.
D-7084
FIG. 5
Tractor must be equipped with rollover protective structure
(ROPS) and a seat belt. use seat belt during operation.
Do not dismount from moving machinery.
Always operate the machine with the control console
turned on.
Never start the tractor with the PTO engaged or control
console turned on.
Where possible avoid operating the baler near ditches,
embankments and holes. Reduce speed when turning,
crossing slopes, and on rough, slippery, or muddy
surfaces.
01-10
4283062M6
Advertisement
Table of Contents
