Service Check
The service mode allows one to view the number of regenerations in the past 14 days, the total number of regenerations the
control has cycled through and the number of days since the last regeneration.
To enter the service check mode, follow these steps:
1.
From the Blank display:
2.
Press the "-" key. The display will blink "14dY" for 3 seconds and then display
the number of regenerations that have occurred in the last 14 days.
3.
Press the "-" key. The display will blink "totL" for 3 seconds and then display the
total number of regenerations this control has cycled through.
4.
Press the "-" key. The display will blink "daYS" for 3 seconds and then display
the number of days since last regeneration.
Note: Pressing the "+" key at any time brings back to manual cycling. Pressing
"Status" will Exit the programming menu.
19
Culligan Medallist Series
®
Water Filters
2
93
5