Canon W2200 User Manual page 32

5
6
Important
2-10
Print Media You Can Use
Pick up a stack of paper and fan it to remove static cling. Tap the
edges of the stack against a flat surface to align the edges.
With the print side (b) facing down, load the stack (c) in the cassette
with the length guide against the bottom of the stack.
You can fill the cassette up to the load limit mark (a) marked on the width
guide.
z Overloading the paper cassette can cause paper jams. Never load paper higher than
the load limit mark (a), and never load more than the number of sheets
recommended for special print media. (Æ"Maximum Stack Size" P.2-6)
z A large gap at the side of the stack (c), or incorrect alignment of the stack here,
may cause poor print results due to paper skew during feeding. Make sure that the
side is aligned correctly and that the stack is snug against this side of the cassette.
z To avoid paper jams, make sure that the trailing edge is aligned square with the
length guide, and make sure that the edges at (d) are straight and not slanted.
>
?
d