Canon W2200 User Manual page 36

Note
1
2
2-14
Print Media You Can Use
z The printer is shipped from the factory with the "Media Size" set for "B5-JIS" and
the "Media Type" set for "Plain Paper".
z While printing with one of the settings described above, if the ink blurs or if
printing is too light, select Special 1 to 5 for the "Media Type". These settings
adjust the ink density in five steps, starting with the lowest density (1) to the
highest density (5). The setting may require testing and adjustment, depending on
the media in use and the content of the image.
z "Proof C" and "Proof D" are displayed as media type items on the operation panel,
but these items are not currently available for selection. These are preliminary
settings for selection to be added in the future.
z To achieve better quality printing, perform the "Paper Adjust" setting on the
Æ
operation panel.( "Adjusting the Amount of Line Feed for Each Media" P.7-40)
Press the Online button to switch off the Online lamp.
The printer is set offline.
Press the Set Media button.
The Set Media menu opens.
et Media
Cancel Job/
etup
Utility
Reset/Enter
Power
Online Ink Replace
Online Message
Set Media
Cancel Job/
Utility Setup
Reset/Enter
Power
Online Ink Replace
Online Message