Software Installation; Tango_Plus Driver Installation; Tango-Utilities Installation - SINUS Tango Plus Manual

1.7 Software installation

First TANGO driver must be installed for that Tango_Plus is recognized via USB connection. Second Tango-
Utilities should be installed for configuration of Tango_Plus settings and export of data.

1.7.1 Tango_Plus driver installation

Please follow the instructions below to install the TANGO driver on a PC. You find the file on the enclosed
USB stick. Use the Windows Explorer to start the driver installation programme. Perform the install setting
and confirm always. Depending on the system performance this procedure may take a few minutes.

1.7.2 Tango-Utilities installation

Installing the software Tango-Utilities resembles the installation procedure of most Windows applications.
Follow the instructions below:
Run the installation program (
The first window shows the software version. Click on
Set the installation directory in the next window. Click on
In this dialog you may specify the directory in the Windows Start Menu. Click on
the next dialog.
This dialog summarizes your settings. Click on
Finish the installation by clicking on
SINUS Messtechnik GmbH
1.7 Software installation
Version
Tango_Utilities_
Install
.
Finish
11 of 47
).
.exe
to continue to the next window.
Next
to continue to the next dialog.
Next
to confirm and continue.
to continue to
Next
Manual Tango_Plus