Design; General Information - SINUS Tango Plus Manual

1 Design

Thank you for choosing the product Tango_Plus by SINUS Messtechnik GmbH. Please read this manual
carefully before using the measuring system. Tango_Plus is an integrating sound level meter designed
according to IEC 61672-1:2014, accuracy class 1 and immunity to interference group Z. It can measure also
1/1 and 1/3 octaves according to IEC 61260:2003. This is true for all configurations described in section 3.
NOTICE!
ATTENTION!
We recommend you to perform several test measurements to get familiar with the instrument before using it
for important measuring tasks.

1.1 General information

The manual includes the following signs to indicate important information:
NOTICE!
CAUTION!
ATTENTION!
Please feel free to contact us for any questions on the functionality and operation of the instrument. Direct
your questions or requests on spare parts and accessories to the following address:
Address: SINUS Messtechnik GmbH
Föpplstraße 13
04347 Leipzig, Germany
Telephone: +49-(0)341-24429-33
Fax: +49-(0)341-24429-99
E-mail: info@soundbook.de
Web: http://www.soundbook.de
SINUS Messtechnik GmbH
Tango_Plus may perform measurements that require an official verification
of the calibration and that are legally binding.
(type approval applied)
If Tango_Plus is used for legally binding measurements, only original
accessories shall be used.
These are information on the efficient use and correct handling of the ana-
lyzer as well as additional information.
These instructions shall avoid any hardware damages or dangers for users.
These instructions shall avoid any measurement mistakes, hardware da-
mages etc.
5 of 47 Manual Tango_Plus