Replacing Van Seat Armrest Pad Assembly (Wheelchairs Built After October 2003) - Invacare Pronto M71 Service Manual

5. Reinstall van style armrest pad. Refer
to Replacing Van Seat Armrest Pads
(Wheelchairs Built before October
2003) on page 56.
6. If necessary, install the joystick. Refer to
Removing/Installing the Joystick, Van
Seat Models on page 98.
7. Repeat STEPS 1-6 for the opposite
armrest plate, if necessary.
Replacing Van Seat Armrest Pad Assembly (Wheelchairs Built After
October 2003)
NOTE: For this procedure, refer to FIGURE 5.5.
1. If necessary, remove the joystick. Refer to Removing/Installing the Joystick, Van Seat
Models on page 98.
2. Remove the mounting screw, washers and locknut that secure the existing armrest pad
assembly to the arm post.
3. Position the new armrest pad assembly on the armrest post and secure with the
mounting screw, washers, and locknut. Refer to FIGURE 5.4 for correct hardware
orientation.
4. If necessary, install the joystick. Refer to Removing/Installing the Joystick, Van Seat
Models on page 98.
5. Repeat STEPS 1-4 for the opposite armrest plate, if necessary.
Mounting Screw
Washers
FIGURE 5.5 Replacing Van Seat Armrest Pad Assembly (Wheelchairs Built After October
Part No 1118377
All manuals and user guides at all-guides.com
Washer
2003)
57
Washer
Mounting
Screw
Washers
FIGURE 5.4 Replacing Van Seat Armrest
Plate (Wheelchairs Built before October
2003)
Armrest Pad
Assembly
Arm Post
Locknut
SECTION 5—ARMS
Locknut
Armrest
Plate
Arm Post
Pronto® M71™