Location of controls and basic operations
This section contains instructions on the location
of controls and basic operations.
For details, see the respective pages.
A SEEK +/– buttons
To tune in stations automatically (press); find
a station manually (press and hold).
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
(BROWSE) button page 13
To enter the Quick-BrowZer™ mode.
C SOURCE/OFF button
Press to turn on the power/change the source
Press for 1 second to turn off the power.
Press for more than 2 seconds to turn off the
power and the display disappears.
D Control dial/select button page 14, 17
To adjust volume (rotate); select setup items
(press and rotate).
E Disc slot
Insert the disc (label side up), playback
F Display window
G Z (eject) button
To eject the disc.
H USB connector page 12
To connect to the USB device.
(front panel release) button page 7
(BACK)/MODE button page 10, 13
Press to return to the previous display/select
the radio band (FM/MW/LW).
K Receptor for the card remote
L ZAP button page 14
To enter ZAPPIN™ mode.
M AF (Alternative Frequencies)/
TA (Traffic Announcement)/
PTY (Program Type) button page 11
To set AF and TA (press); select PTY (press
and hold) in RDS.