Table of Contents
Advertisement
Adjustment
58
Fig. 1 - 27
More information and assistance is at your disposal in the fi le "PFPHILFE.TXT",
which can be called up from the PFP boot program by pressing the "help"
button.
● witch on the machine, keeping the boot
key 1 pressed.
● Press the "TE" key.
The software update is carried out. Dur-
ing the updating process the diode in the
memory card slot fl ashes.
● During the updating process the machine
must not be switched off.
● When the update has been completed,
switch off the machine and remove the
SD-card.
● Switch on the machine
1
● A plausibility control is carried out and, if
necessary, a cold start.
● To update the step motor software
please contact your PFAFF representa-
tive.
Advertisement
Table of Contents
