Needle Rise, Hook Clearance, Needle Height And Needle Guard (On The Pfaff 2571 Me) - Pfaff POWERline 2571 ME PLUS Service Manual

Adjustment
1 Needle rise, hook clearance, needle height and needle guard
.05.07
12
Requirement
With the needle bar positioned 2.0 mm after BDC (balance wheel position 202°) and the
stitch length set at "0.8"
1. the hook point must be at needle centre with a hook-to-needle clearance of 0.05 to 0.1 mm;
2. the top of the needle eye must be 0.8 to 1.0 mm below the hook point;
3. the needle guard 7 must touch the needle lightly.
4
Fig. 1 - 07
7
12
1
8
5
5
(on the PFAFF 2571 ME)
3
2
11
10
6
9