Mounting The Unit (All Units) - Omron Sysmac CS1 Operation Manual

Installation
CS1-series CPU Rack
CS1-series Expansion Rack No. 1
CS1-series Expansion Rack No. 2
CS1-series Expansion Rack No. 7

3-2-2 Mounting the Unit (All Units)

1, 2, 3...
Note The CIO Area words that are allocated to Special I/O Units depends on the set-
ting of the unit number switch on the front of the Unit, not on the slot in which the
Unit is mounted.
Use the following procedure to mount the Customizable Counter Unit to the
Backplane.
1. Hook the top end of the Unit onto the Backplane as shown below.
2. Make sure that the connector on the back of the Unit is properly inserted into
the connector in the Backplane, and tighten the screw on the bottom of the
Unit securely. The tightening torque for the screw is 0.4 N⋅m.
CPU Unit
I/O Unit
Power Supply Unit
I/O Unit
I/O Unit
Up to 7 Expansion Racks
can be connected.
I/O Unit
Hook
Section 3-2
Backplane
25