Pulse Outputs; Internal Circuit Configurations; Applicable Models; Outline - Omron Sysmac CS1 Operation Manual

Pulse Outputs

Applicable Instructions
Instruction
(@)CTBL(63) ( ) ( )
Range comparison
Target value comparison table
registration and starting comparison
Target value comparison table
registration
(@)INI(61)
Starting comparison
Stopping comparison
Changing PV
(@)PRV(62) ( ) ( ) Reading high-speed counter PV
Reading high-speed counter rate of
change or frequency

7-5-4 Internal Circuit Configurations

Phases A and B of Pulse Input
(1)
(2)
(3)
–
Phase Z of Pulse Input
(1)
(2)
(3)
–
7-6

Pulse Outputs

7-6-1 Applicable Models

7-6-2 Outline

98
Control
4.4 kΩ
660 Ω/1.64 kΩ
(1) 24-V input
(2) Pulse input 1: 5-V input, Pulse input 2: 12-V input
(3) Line-driver input
3.0 kΩ
440 Ω/940 Ω
(1) 24-V input
(2) Pulse input 1: 5-V input, Pulse input 2: 12-V input
(3) Line-driver input
Model numbers
CS1W-HCP22 12 contact inputs, 8 contact outputs, 2 pulse inputs, 2 pulse outputs
The
CS1W-HCP22 Customizable Counter Unit provides 2 pulse outputs. The pulse out-
puts can be used for the following functions.
Description
One range comparison executed.
Target value comparison table registered and comparison
started.
Target value comparison table registered.
Comparison started with previously registered target value
comparison table.
Target value comparison stopped.
PV of high-speed counter changed.
PV of high-speed counter read.
Rate of change or frequency of high-speed counter read.
Functions
Section
Phase A/B internal circuits
Phase Z internal circuits
7-6