Data Hold; Data Record (Max., Min. Reading) - Lutron Electronics YK-2005LX Manual

2)If intend to change the display unit from LUX to Ft-cd
( feet candle ), please refer page 15, chapter 5-6 ( Unit
Default Setting )
3)The meter is defaulted to auto range function.
However if intend to use the meter under manual
range, please refer page 15, chapter 5-7
( Auto/Manual Default Setting )
For the manual range operation, press the " RANGE
Button " ( 3-6, Fig. 1 ) will change the range.
* If the display shows "
overload condition, select the next higher range.
* If the display shows "
out-of-range, select the next lower range.
4)Zero adjustment :
If blank the Light Sensor ( 3-18, Fig. 1 ) by " Sensor
Cover " ( 3-20 , Fig. 1 ), the dsiplay not show zero
value, press the " ZERO Button " ( 3-5, Fig. 1 ) display
will show zero value. Upon completion, remove the
sensor cover.

4-2 Data Hold

Du Press the " Hold Button " once again will release the data
Fig hold function.
display a " HOLD " symbol.
4-3 Data Record ( Max., Min. reading )
* The data record function records the maximum and
minimum readings. Press the " REC Button " ( 3-4, Fig.
* 1 ) once to start the Data Record function and there
will be a " REC. " symbol on the display.
", it indicates an
", it indicates an
9