Installation Instruction
Figure 63
9. Attach the wires to the appropriate connectors in the terminal block.
Note: See the Site Installation Documentation for more information on the
Figure 64
10. Pull the cable back through the cable gland and clamp it by screwing the
cable gland together from underneath. See figure below.
Note: Make sure that the outer screen is in contact with the earth
52
All manuals and user guides at all-guides.com
Wire Connections Variant 2
alarm cable connections.
OVP Module Connection Points
grounding of the cable gland.
1/1531-COH 109 2073 Uen H 2006-11-06
P016851A