Table of Contents
Advertisement
Installation Instruction
Figure 35
7. Make sure that the battery cable is not yet connected to the BFU.
8. Connect the blue end of the battery cable to the minus pole of the leftmost
battery (battery 1) as shown in the figure below. Tighten the bolt to a torque
of 8 Nm, using a torque wrench and a 13 mm socket.
9. Connect the red end of the battery cable to the plus pole of the rightmost
battery (battery 4) as shown in the figure below. Tighten the bolt to a torque
of 8 Nm, using a torque wrench and a 13 mm socket.
32
All manuals and user guides at all-guides.com
Gas-Evaporating Tubes
1/1531-COH 109 2073 Uen H 2006-11-06
Advertisement
Table of Contents
