Installation Instruction
Figure 52
13. Pull the cable back through the cable gland and clamp it by screwing the
cable gland together from underneath. See figure below.
Note: Make sure that the outer screen is in contact with the earth
Figure 53
14. Make a note of the cable data on the cover of the OVP Module.
15. Reinsert the six screws in the DF and tighten them with a T30 Torx
screwdriver.
44
All manuals and user guides at all-guides.com
OVP Module Connection Points
grounding of the cable gland.
Cable Secured
1/1531-COH 109 2073 Uen H 2006-11-06