Attach The Mounting Bracket - Cisco IR8140H Mounting

Mounting the Router
Item Description
1 Pivot grooves (4)
2 Quick-hang notch
3 Quick-hang slots (2)
4 Optional wall-mount holes (4)
The mounting plate must be installed as described in the section
Note
page 6.

Attach the Mounting Bracket

To attach the mounting bracket to the mounting plate, perform this procedure.
Figure 12: Mounting Bracket Attached to Mounting Plate
Required Materials
• Mounting bracket and hardware as described in the
• 13-mm box-end socket wrench
Attach the Mounting Bracket
Install the Mounting Plate On To a Pole, on
Mounting Bracket Kit, on page 4
Mounting the Router
13