Table of Contents
Advertisement
Mounting the Router
Figure 7: Mounting Plate Installed on Pole with Clamp Brackets
Item
Description
1
Pole clamp notch
2
Carriage bolts (4)
3
Pole clamps (2)
Install the Mounting Plate Poles Larger than 4.5 Inches in Diameter
Required Materials
• Mounting plate and steel straps as described in
• BAND-IT tool as described in
• Torque wrench
To install the mounting plate on a vertical pole that is larger than 4.5 inches (11.4 cm) in diameter, perform
the following procedure.
Install the Mounting Plate Poles Larger than 4.5 Inches in Diameter
Pole Mount Kit, on page 2
Strap Tool Kit, on page 5
Mounting the Router
9
Advertisement
Table of Contents
