Cable-Management Bracket Requirements - Cisco UBR7225VXR Hardware Installation Manual

Chapter 3 Installing the Cisco uBR7225VXR Router
Figure 3-4
1 Rack-mount bracket
See the
mounting information.
Figure 3-5
1 Rack-mount bracket

Cable-Management Bracket Requirements

There are two cable-management bracket configurations available for rack-mounting the
Cisco uBR7225VXR router. In the first configuration, for a 4-post rack, the rack-mount brackets are
installed at the rear of the chassis and the cable-management bracket is installed at the right front of the
chassis. (See
OL-17309-01
Installing the Chassis in a 4-Post Rack—Chassis Protruding Front Installation
1
"Installing Rack-Mount Brackets in the Middle of the Chassis" section on page 3-9
Installing the Chassis in a Telco-Type Rack
1
Figure 3-6.) You must install both sets of brackets before you install the chassis in the rack.
Cisco uBR7225VXR Universal Broadband Router Hardware Installation Guide
Cisco uBR7225VXR Router Chassis Rack-Mounting Options
for bracket
3-5