Pole Mount Kit - Cisco IR8140H Mounting

General Safety Information for Mounting
Cisco Product ID (PID)
AIR-BAND-INST-TL=
General Safety Information for Mounting
Read the safety warnings in this section.
One person is required to properly and safely mount the router.
Note All mounting methods at any location are subject to the acceptance of local jurisdiction.
Note
The mounting surface, attaching screws, and optional wall anchors must be able to support a 50 pound (22.7
kg) static weight.
Note Personnel mounting the router must understand grounding methods.
Warning
Do not locate the antenna near overhead power lines or other electric light or power circuits, or where
it can come into contact with such circuits. When installing the antenna, take extreme care not to come
into contact with such circuits, as they may cause serious injury or death. For proper installation and
grounding of the antenna, please refer to national and local codes (for example, U.S.:NFPA 70, National
Electrical Code, Article 810, Canada: Canadian Electrical Code, Section 54). Statement 1052
Contents of the Mounting Kits
This section describes the contents of the mounting kits available for the router, and when you should use
each kit.

Pole Mount Kit

Use the Cisco pole mount kit to install the mounting plate on any pole or streetlight. The kit supports poles
that meet the following criteria:
• Size: 2 to 16-inch diameter poles
• Material: Metal, wood, or fiberglass poles
Mounting the Router
2
Name Description
Strap Tool Kit, on This kit includes a BAND-IT tool that is required when using
page 5 steel straps to install the router on poles larger than 4.5 inches
(11.4 cm) in diameter.
Mounting the Router