Cisco IR8140H Mounting page 12

Attach the Mounting Bracket to the Mounting Plate
Attach the Mounting Bracket to the Mounting Plate
This section describes how to attach the mounting bracket to the mounting plate.
Assemble Bracket Hardware
Several of the procedures in this section require you to assemble the bracket hardware before installing the
bracket. A bracket hardware set consists of one bolt, one washer, one split-lock washer, and one nut.
To assemble the bracket hardware set, perform the following procedure.
Figure 10: Assemble Bracket Hardware Set
Step 1
Slide the split-lock washer (2) on the bolt (1).
Step 2 Slide the regular washer (3) on the bolt (1).
Ensure that the split-lock washer is between the regular washer and the bolt as shown in
Details, on page
The instructions for the procedures in this section make a reference to the mounting plate shown in the following figure.
Figure 11: Mounting Bracket Details
Mounting the Router
12
12.
Mounting the Router
Figure 11: Mounting Bracket