Materials and Tools You Supply
Figure 4: Strap Tool Kit Contents
Item
1
2
Materials and Tools You Supply
• 1/2-inch (13-mm) socket wrench
• #2 Phillips head screwdriver
Mounting Instructions
This section includes all the procedures required to mount the router on any supported pole type.
Install the Mounting Plate On To a Pole
This section describes three different procedures for installing the mounting plate on a pole. Follow the
instructions provided for the pole type used in your installation.
The instructions in these sections refer to the mounting plate features shown in the following table.
Mounting the Router
6
Description
Strap tool
Strap tool documentation (not shown)
Mounting the Router