Table of Contents
Advertisement
Mounting the Router
Figure 3: Band Strap Kit Contents
Item
1
Strap Tool Kit
Use the tool in the strap tool kit to attach the steel straps that are included in the band strap kit. Steel straps
are required to install the mounting plate on poles larger than 4.5 inches (11.4 cm) in diameter. See
Strap Kit, on page
Note
The tool in the strap tool kit is manufactured and supported by BAND-IT.
Description
Steel straps
(2)
4.
Strap Tool Kit
Band
Mounting the Router
5
Advertisement
Table of Contents
