Chapter 3: The Radio; Listening To The Radio - Sony LBT-D560 Operating Instructions Manual

Chapter 3:
the
stelelley
Listening to the Radio
Presetting Radio Stations
Playing Preset Radio
Stations
10 Chapter 3: the Radio
Pi ae ne al)
Listening to the Radio
When you want to play a radio
programme, you can have the tuner
automatically scan the radio frequencies
and tune in the stations with clear signals.
This feature saves your time in searching
for stations with clear signals.
However, stations with weak signals may
be skipped by automatic tuning. Manually
tune in the ones skipped by automatic
tuning.
SYSTEM
POWER 3ON
STEREO/MONO
'1 Press TUNER/BAND (or BAND on the
remote) repeatedly until the band you
want appears in the display.
As you press this button, the band
changes as follows:
FM 4—> AM
ween vovos FH
eel ee OIC
2 Press TUNING MODE repeatedly until
"AUTO TUNING" appears in the
display.
omooo
3 Press TUNING (+/-).
The tuner starts scanning radio
frequencies, and stops when it finds a
clear station. "TUNED" appears in the
display window. "STEREO" also
appears if the FM station tuned is
broadcasting in stereo.
4 If you don't want to listen to the station
selected, press TUNING (+/-) to restart
the scan.
When the desired station is not
tuned in
Automatic tuning may skip the stations
with weak signal and continue scanning
without a stop. In this case, tune in the
station manually.
4 Press TUNING MODE repeatedly until
"TUNING" appears in the display.
2 Press TUNING (+/-) repeatedly until
the desired station is tuned in.
To improve AM broadcast reception
Reorient the supplied AM loop antenna for
a
To change the AM tuning interval
The AM tuning interval is preset to 10 kHz
in the factory. If you need to change the
interval, do as follows:
1 Turn on the power.
2 Change the band to AM.
3 Turn off the power.
4 Turn the power back on while pressing
TUNING MEMORY.
After changing the tuning interval, reset the
preset AM radio stations.
When an FM program is not clear to receive
Press STEREO/MONDO on the remote so i
that "MONO" appears in the display. There
will be no stereo effect, but the reception
will improve. Press STEREO/MONO on
the remote again to restore the stereo effect.
One Touch Play feature
Press TUNER/BAND (or BAND on the
remote) when the power is off or when you
are listening to another sound source.
You can listen to the last received station
without pressing any other buttons.
You
tune
stat
ord
stat