Table of Contents
Advertisement
Chapter 3:
P
Listening to the Radio
the
When you want to play a radio program,
you can have the tuner automatically scan
the radio frequencies and tuned in the
stations with clear signals. This feature
saves you time in searching for stations
with clear signals.
However, stations with weak signals may
be skipped by automatic tuning. Manually
tune in the ones skipped by automatic
tuning.
SYSTEM
rowesvonl1 2 3,4
Radio
Listening to the Radio
XN
Presetting Radio Stations
Playing Preset Radio
Stations
ENTER/
NEXT
STEREO/MONO
1 Press TUNER/BAND repeatedly until
the band you want appears and in the
display.
As you press this button, the band
changes as follows:
FM <+—> AM
2 Press TUNING MODE repeatedly until
"AUTO" appears in the display.
ya
Mauk
I,
y
mrt
1
oS
pit
tl L
ot
tod,
Mog
<
>
a
3 Press TUNING
+/- buttons.
The tuner starts scanning radio
frequencies, and stops when it finds a
clear station. "TUNED" appears in the
display. "STEREO" also appears if the
FM station tuned in is broadcasting in
stereo.
Ais you don't want to listen to the
selected station, press TUNING +/-
buttons to restart the scan.
When the desired station is not
tuned in
Automatic tuning may skip the stations
with weak signals and continue scanning
without a stop. In this case, tune in the
station manually.
1
Press TUNING MODE repeatedly until
"MANUAL" appears in the display.
2
Press TUNING +/- buttons repeatedly
until the desired station is tuned in.
To improve AM broadcast reception
Reorient the supplied AM loop antenna for
AM.
To change the AM tuning interval
The AM tuning interval is preset to 10 kHz
at the factory. If you need to change the
interval, do as follows:
1 Turn on the power.
2 Change the band to AM.
3 Turn off the power
4 Turn the power back on while pressing
ENTER/NEXT.
After changing the AM tuning interval,
reset the preset AM radio stations. To reset
the interval to the factory setting, tollow the
same procedure.
When an FM program is not clearly to
received
Press STEREO/MONO on the unit so that
"MONO" appears in the display. There will
be no stereo effect, but the reception will
improve. Press STEREO/MONO again to
restore the stereo effect.
One Touch Play feature
Press TUNER/BAND (or TUNER/ BAND
© on the remote) when the power is off or
when you are listening to another sound
source.
-
You can listen to the last received station
without pressing any other buttons.
Chapter 3: the Radio | 11
Advertisement
Table of Contents
