Adjusting The Recording Level - Sony CMT-CP500MD Operating Instructions Manual

1
Press FUNCTION repeatedly until "MD"
appears in the display.
2
Press MENU/NO on the remote
repeatedly until "Setup Menu" appears
in the display.
3
Press . or > on the remote
repeatedly until "S.Space Off" (or
"S.Space On") appears, then press
ENTER/YES on the remote.
4
Press . or > on the remote
repeatedly to select the setting, then
press ENTER/YES on the remote.
To Select
Turn on the Smart S.Space On (factory
Space function setting)
Turn off the Smart
S.Space Off
Space function
5
Press MENU/NO on the remote.
To continue and record, follow the
procedures described on the various
recording pages.
Tip
To restart the recording when "Auto Cut" appears in
the display, press N on the remote.

Adjusting the recording level

When recording on an MD, you can adjust the
recording level to the desired volume. You can
adjust the recording level not only when
making an analog recording, but also when
making a digital recording from a CD, etc.
1
Prepare the desired sound source to
record and start play.
2
Confirm that the MD deck is in
recording standby.
If not, press MD REC z.
3
Press MENU/NO on the remote
repeatedly until "Setup Menu" appears
in the display.
4
Press . or > on the remote
repeatedly until "LevelAdjust?"
appears, then press ENTER/YES on the
remote.
5
Press . or > on the remote to
adjust the recording level.
Make sure that "OVER" does not appear in
the display at the loudest portion.
6
Press ENTER/YES on the remote.
7
Press MENU/NO on the remote.
8
Press x on the remote.
To continue and record, follow the
procedures described on the various
recording pages.
Tips
• You can also adjust the recording level during
recording.
• Once adjusted, the recording level is maintained
until you adjust it again.
GB
23