Erasing A Disc Title - Sony CMT-CP500MD Operating Instructions Manual

Table of Contents

Labeling a CD (continued)

Enter a character.

If you have selected uppercase or

lowercase letters

1 Press the corresponding letter button

repeatedly until the character to be

entered flashes.

Or, press the button once and press .

or > on the remote repeatedly.

2 Press CURSORt on the remote.

The flashing character is entered and the

cursor shifts to the right.

If you have selected numbers

Press the corresponding number button.

The number is entered and the cursor shifts

to the right.

To enter a blank space

1 Press NAME EDIT/SELECT on the

remote to select upper case or lower

case letters.

2 Press 10/0 on the remote.

A blank space is entered and the cursor

shifts to the right.

Repeat steps 3 and 4 to enter the rest

of the name.

To change a character

Press TCURSOR or CURSORt on the

remote repeatedly until the character to be

changed flashes, press CLEAR on the

remote to erase the character, then repeat

steps 3 and 4.

Press ENTER/YES on the remote to

complete the labelling procedure.

To cancel labeling

Press MENU/NO on the remote.

Checking the disc titles

Press MENU/NO on the remote in stop

mode.

Press . or > on the remote

repeatedly until "Name Check ?"

appears, then press ENTER/YES on the

remote.

Press . or > on the remote

repeatedly to select the disc titles

stored in the system memory between

01 and 50.

To check the current disc title

Press SCROLL on the remote in stop mode.