Using The Md Display - Sony CMT-CP500MD Operating Instructions Manual

5
To program additional tracks, repeat
steps 3 and 4.
6
Press MD u (or N on the remote).
To Do this
Press . or >
Check the program
order repeatedly during Program
Play.
Check the total number Press DISPLAY on the
of programed tracks remote in stop mode. The
last programed track
number appears, followed
by the total number of
programed steps.
Press MD x, then press
Cancel Program Play
PLAY MODE
DIRECTION (or PLAY
MODE on the remote)
repeatedly until "PGM" and
"SHUFFLE" disappear
from the display.
Add a track to the end Do steps 3 and 4 with
of the program program play stopped.
Erase the last Press CLEAR on the
programed track remote in stop mode. Each
time you press the button,
the last programed track is
erased.
Select the desired track Press number buttons
using the number instead of performing steps
buttons on the remote 3 to 5. To use number
buttons, see page 14.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, switch
the function to MD, and press MD u (or N on
the remote).
• "---.--" appears when the total MD program time
exceeds 1000 minutes.

Using the MD display

Press DISPLAY on the remote repeatedly.
The display changes as follows:
During normal playback
Current track number and elapsed playing time
of the track t Current track number and
remaining playing time of the track t
Remaining playing time of the entire MD t
1 t Clock display t BASS
MD track title*
level t TREBLE level t Current track
number and elapsed playing time of the track
t ...
While the MD is stopped
Total number of tracks and total playing time*
t Remaining recordable time (only for a
recordable MD) t MD disc title*
display t BASS level t TREBLE level t
Total number of tracks and total playing time*
t ...
1
* Nothing appears when no disc or track title is
labeled.
2
* "---.--" appears when the total MD program time
exceeds 1000 minutes.
Tip
You can check a track title at any time during play. If
you press SCROLL on the remote, a track title
appears scrolling in the display.
Press SCROLL on the remote at any point during the
scroll display to stop the scrolling. Press SCROLL on
the remote again to restart the scrolling.
2
1 t Clock
2
GB
15