Specifications - Sony CMT-CP500MD Operating Instructions Manual

TUNER
Cannot Edit
You tried to label or erase a non-preset station.
CD
Cannot Edit
You tried to label a CD TEXT disc.
CD No Disc
There is no CD in the player.
Name Full
There are already 50 disc titles stored in the
system.
OVER
You have reached the end of the CD while keeping
pressing M during play or pause.
Step Full!
You try to program 26 or more tracks (steps).
TAPE
Cannot SYNC
There is no tape in the tape deck, or the tab has
been removed from the cassette.
No Tab
You cannot record the tape because the tab has
been removed from the cassette.
No Tape
There is no tape in the tape deck.

Specifications

Amplifier section
The following measured at 220 V AC, 60 Hz
DIN power output (rated): 24 + 24 W
Continuous RMS power output (reference):
Inputs
ANALOG IN (phono jacks):
DIGITAL OPTICAL IN (Supported sampling
frequencies: 32 kHz, 44.1 kHz and 48 kHz)
Outputs
PHONES (stereo minijack):
SPEAKER:
CD player section
System
Laser
Wavelength
Frequency response
Tape player section
Recording system
Frequency response
Wow and flutter
MD deck section
System
Laser
Sampling frequency
Frequency response
(6 ohms at 1 kHz, DIN)
27 + 27 W
(6 ohms at 1 kHz, 10%
THD)
Sensitivity 250 mV,
impedance 47 kilohms
Accepts headphones with
an impedance of 8 ohms
or more
Accepts impedance of 6 to
16 ohms
Compact disc and digital
audio system
Semiconductor laser
( = 780 nm)
Emission
duration: continuous
780 – 790 nm
2 Hz – 20 kHz (±0.5 dB)
4-track 2-channel stereo
50 – 13,000 Hz (±3 dB),
using a Sony TYPE I
cassette
±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
MiniDisc digital audio
system
Semiconductor laser
( =780 nm)
Emission duration:
continuous
44.1 kHz
5 Hz – 20 kHz
continued
GB
53