Inserting Two Size-Aa (R6) Batteries Into The Remote Control; Setting The Time - Sony CMT-CP500MD Operating Instructions Manual

3 Connect the power cord to a wall outlet.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
To turn on the system, press @/1.
Inserting two size-AA (R6)
batteries into the remote
control
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to prevent possible damage from
battery leakage and corrosion.

Setting the time

1
Turn on the system.
2
Press CLOCK/TIMER SET on the
remote.
If you are setting the clock for the first time,
go to step 5.
Press . or > on the remote
3
repeatedly until "CLOCK SET" appears
in the display.
4
Press ENTER/YES on the remote.
The hour indication flashes.
Press . or > on the remote
5
repeatedly to set the hour.
6
Press ENTER/YES or CURSORt on
the remote.
The minute indication flashes.
Press . or > on the remote
7
repeatedly to set the minute.
8
Press ENTER/YES on the remote.
The clock will begin operating.
To reset the system clock
Start over from step 1.
GB
7