Chicco BebeCare Kiros i-Size Manual page 18

1.3 PRODUCT FEATURES
This child car seat is approved for the safe
transportation of children with a height be-
tween 40-78 cm (from birth up to 13 kg - from
0 to 15 months), in accordance with European
Standard UN/ECE R129
IMPORTANT NOTICE CONFIGURATION
WITH i-Size BASE
This is an "i-Size" child car seat. It is approved
according to Regulation UN/ECE R 129 for use
in vehicles with "i-Size compatible" seats as in-
dicated by the vehicle manufacturer in the ve-
hicle's instruction manual and in the attached
vehicle compatibility list.
In case of doubts, contact the manufacturer
of the restraint device or your dealer.
WARNING! Serious danger! Do not install the child
car seat on seats where the airbag is activated.
IMPORTANT NOTICE CONFIGURATION
WITHOUT THE i-Size BASE
This is a "Universal" child car seat. It is approved
according to Regulation UN/ECE R 129 for use
in vehicles with "Universal" seats as indicated
by the vehicle manufacturer in the vehicle's
instruction manual.
In case of doubts, contact the manufacturer
of the restraint device or your dealer.
WARNING! SERIOUS DANGER! Do not install
the child car seat on seats where the airbag is
activated.
1.4 DESCRIPTION OF THE COMPONENTS
i-Size base
Fig. C
A. Isofix connectors
B. Isofix connector removal lever
C. Isofix system connection indicators
D. Isofix connector release buttons
E. Child car seat fastening slots
F. Child car seat correct fastening indicator
G. Support leg
H. Support leg height adjustment button
I. Leg support correct installation indicator
J. Rebound bar
Kiros i-Size child car seat
Fig. D
X. Handle
K. Hood
L. Fabric cover
M. Reducer cushion
Fig. E
N. Child car seat harness
O. Shoulder straps
P. Buckle
Q. Harness adjustment button
R. Adjustable headrest
Fig. F
S. Waist car safety belt slot on the child car seat
T. Buttons to rotate the carry handle
Fig. G
U. Diagonal car safety belt slot
V. Release handle (from the I-Size base and
stroller)
Z. Headrest and belt adjustment button
1.5 POSITIONS OF THE HANDLE
The child car seat handle can be adjusted to 3
positions (Fig. 1).
A. Position for transportation in the car with
the base and without the base and for car-
rying by hand.
B. Reclined cradle mode position, or for fasten-
ing to an appropriate Chicco stroller.
C. Fixed reclined cradle position.
To adjust the position, press both buttons (T)
on the handle bar together and rotate it to
the desired position until you hear it click into
place.
1.6 RESTRICTIONS AND REQUIREMENTS
REGARDING
PRODUCT AND VEHICLE SEAT
The child car seat can be installed in two dif-
ferent ways:
- The i-Size base (type approval number
030059) must be used exclusively in combi-
nation with the Kiros i-Size car seat, approved
according to standard UN/ECE R129. Before
installation, check that the car is fitted with
Isofix anchorage points, which can be found
between the backrest and seat of the car.
The Chicco i-Size base can be used on all i-Size
18
THE USE OF THE