Table of Contents
Advertisement
Refrigerant:
Refrigerant electronic scales:
Electronic vacuum meter:
Low pressure / high pressure gauge:
PLUS EVOLUTION Internal reservoir capacity:
HD EVOLUTION Internal reservoir capacity:
Maximum volume of R134a medium:
Maximum volume of R134a medium: HD version:
Pump capacity:
Pump capacity: HD version:
Final vacuum:
Filtration unit:
DIMENSIONS:
Weight:
Weight - HD version:
Supply voltage :
Power:
Device noise level was measured in reference to the operator's location (at the front).
Measured parameters:
Microphone distance above ground:
Microphone distance from the device:
3.3.4
Technical specifications of measuring instruments used
(in accordance with the recommendations of IEC 651 Group1).
Precision integrating phonometer B.&.K.
Condenser dielectric-bias microphone.
3.3
Technical specifications
3.3.1
Main specifications
3.3.2
Energy consumption
3.3.3
Power: Noise level
Technical specifications of measuring instruments used
R134a
Accuracy +/- 10 g
class 1.0
class 1.6
12.4 l
27.2 l
10 kg
25 kg
6 m
/h 3.5 CFM – 100 l/min
3
13 m3/h 3.5 CFM - 226 l/min
5 Pa – 0.05 mbar
2 filters in series
1222x629x628 mm
90 kg
105 kg
230 V 50/60 Hz
770 W
53.5 dB (A)
1.40 m
1.00 m
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Clima-Tech Plus and is the answer not in the manual?
Questions and answers
Problème étalonnage code erreur ne peut plus étalonné
Calibration performed by an unauthorized service station is considered an issue with the Magneti Marelli Clima-Tech Plus. This is not covered under the warranty and may result in additional costs for the client.
This answer is automatically generated
Boa tarde, Gostaria de reseta sem o tempo de manutenção teria como fazer isso
To reset the maintenance timer on a Magneti Marelli Clima-Tech Plus:
1. Navigate to the vacuum pump counter reset menu.
2. Press ENTER to confirm.
3. When the display shows "Hold ENTER button for 3 seconds! Counter reset," hold the ENTER button for 3 seconds.
4. Confirm the reset by pressing ENTER again.
This completes the maintenance timer reset.
This answer is automatically generated