Table of Contents
Advertisement
> Alfa Romeo <
Use UP-DOWN buttons to select the brand or go to user vehicles.
Confirm by pressing ENTER.
After selecting the brand you need to repeat all successive operations to confirm system
filling parameters.
Refrigerant qty g: XXXXX
Vacuum:
XX:XX
Vacuum generation time is calculated based on the refrigerant quantity specified.
Use UP-DOWN buttons to select the oil/UV injection program.
See 9.5 Programming oil/UV injection phase.
Confirm by pressing ENTER to start the automatic program with manual oil/UV injection.
>User vehicles<
Alfa Romeo
Use UP-DOWN buttons to select the user's vehicle.
Confirm by pressing ENTER.
See 9.2.1 User vehicles.
When entering the program selection mode (see 9 PROGRAMS) the following menu
appears:
Auto Progr.
User progr. □
Select using UP-DOWN buttons. Confirm by pressing ENTER.
Recycle?
Yes
No
Select using UP-DOWN buttons. Confirm by pressing ENTER.
If NO option is selected, the station will suggest going into vacuum phase.
If YES option is selected, the following message is displayed:
Control of min.
pressure growth
A 1-minute pressure growth test will be proposed before concluding the refrigerant recovery
phase.
Use UP-DOWN buttons to select the desired value. Confirm by pressing ENTER.
Vacuum?
Yes
No
Select using UP-DOWN buttons. Confirm by pressing ENTER.
If NO option is selected, the station will suggest going into filling phase.
If YES option is selected, the following message is displayed:
8.4 User program
■
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Clima-Tech Plus and is the answer not in the manual?
Questions and answers
Problème étalonnage code erreur ne peut plus étalonné
Calibration performed by an unauthorized service station is considered an issue with the Magneti Marelli Clima-Tech Plus. This is not covered under the warranty and may result in additional costs for the client.
This answer is automatically generated
Boa tarde, Gostaria de reseta sem o tempo de manutenção teria como fazer isso
To reset the maintenance timer on a Magneti Marelli Clima-Tech Plus:
1. Navigate to the vacuum pump counter reset menu.
2. Press ENTER to confirm.
3. When the display shows "Hold ENTER button for 3 seconds! Counter reset," hold the ENTER button for 3 seconds.
4. Confirm the reset by pressing ENTER again.
This completes the maintenance timer reset.
This answer is automatically generated