Table of Contents
Advertisement
Name
Vacuum
20
Enter the correct value using UP-DOWN buttons. Confirm by pressing ENTER. Display will
show the entered data.
Refrigerant qty g: 700
Vacuum:
Select ENTER to save the data. You will return to the user's vehicles selection list.
8.3 Automatic program (with a memory card),
When entering the program selection mode (see 9 PROGRAMS) the following menu
appears:
Auto Progr.
User progr. □
Select using UP-DOWN buttons.
Confirm by pressing ENTER.
Specify refrigerant weight ■
User vehicles
Select using UP-DOWN buttons.
Confirm by pressing ENTER.
Specify refrigerant weight
Refrig. g XXXX
Specify the correct refrigerant weight using UP-DOWN buttons.
Confirm by pressing ENTER.
Refrigerant qty g: XXXXX
Vacuum:
XX:XX
Vacuum generation time is calculated based on the refrigerant quantity specified.
Use UP-DOWN buttons to select the oil/UV injection program.
See 9.5 Programming oil/UV injection phase.
Confirm by pressing ENTER to start the automatic program with manual oil/UV injection.
Choose select model function to use the database.
Specify refrigerant weight ■
Select model
Select using UP-DOWN buttons.
Confirm by pressing ENTER.
User vehicles
20
■
□
8.3.1
Searching the vehicle model (Database)
□
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Clima-Tech Plus and is the answer not in the manual?
Questions and answers
Problème étalonnage code erreur ne peut plus étalonné
Calibration performed by an unauthorized service station is considered an issue with the Magneti Marelli Clima-Tech Plus. This is not covered under the warranty and may result in additional costs for the client.
This answer is automatically generated
Boa tarde, Gostaria de reseta sem o tempo de manutenção teria como fazer isso
To reset the maintenance timer on a Magneti Marelli Clima-Tech Plus:
1. Navigate to the vacuum pump counter reset menu.
2. Press ENTER to confirm.
3. When the display shows "Hold ENTER button for 3 seconds! Counter reset," hold the ENTER button for 3 seconds.
4. Confirm the reset by pressing ENTER again.
This completes the maintenance timer reset.
This answer is automatically generated