Table of Contents
Advertisement
The device is optionally equipped with database of vehicle models.
The database is updated annually and once it is out of date, the device will show the following
message
New database version
is available
Press ENTER.
Please contact
dealer
Press ENTER.
To replace the memory card proceed as follows
It is forbidden to perform activities on the device components which are not
specifically referred to in this section
Required tools:
1 Phillips screwdriver
1. Disconnect the device from the power
2. Unscrew
4
screws fixing the plastic device cover and remove the
3. Remove the memory card from the logic
4. Insert the new memory card into the logic
5. Replace the plastic cover and fix it with
6. Once the device is started, the updated data is available
12.3 Replacing memory card.
mains.
board.
board.
screws.
cover.
immediately.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Clima-Tech Plus and is the answer not in the manual?
Questions and answers
Problème étalonnage code erreur ne peut plus étalonné
Calibration performed by an unauthorized service station is considered an issue with the Magneti Marelli Clima-Tech Plus. This is not covered under the warranty and may result in additional costs for the client.
This answer is automatically generated
Boa tarde, Gostaria de reseta sem o tempo de manutenção teria como fazer isso
To reset the maintenance timer on a Magneti Marelli Clima-Tech Plus:
1. Navigate to the vacuum pump counter reset menu.
2. Press ENTER to confirm.
3. When the display shows "Hold ENTER button for 3 seconds! Counter reset," hold the ENTER button for 3 seconds.
4. Confirm the reset by pressing ENTER again.
This completes the maintenance timer reset.
This answer is automatically generated