ElectrIQ CD12LE User Manual page 9

TIMER Button
Press the TIMER button to program the timer. When the timer is activated the
"TIMER" light will be illuminated. Before programming the timer, ensure the
SLEEP
timer function has not been activated (the light must be off). The following
timer programs are available.
DELAYED POWER-ON FUNCTION: With the appliance in stand-by, press
the TIMER button, then use the UP and DOWN buttons to set in how many
hours time you require the unit to start (0~24 hours).
DELAYED POWER-OFF FUNCTION: While the appliance is running with the
desired settings, press the TIMER button, then use the UP and DOWN
TIMER
buttons to set in how many hours time you require the unit to stop (0~24
hours).
SLEEP: Press and hold the TIMER button for 3 seconds to enter sleep
model. The Sleep indicator will illuminate, and all other lights will turn off. The
unit will run at low fan speed. To exit Sleep mode, press and hold the TIMER
button for 3 seconds.
SPEED Button
Press the SPEED button to change the fan speed between HIGH and LOW.
The LED's above the button will illuminate to indicate the currently selected
SPEED
fan speed.
FUNCTION Button
Press the FUNCTION button to activate the UV and Ioniser purification
LOCK
options to improve indoor air quality. The relevant LEDs above the button will
illuminate to show which function is currently activated.
LOCK: Press and hold the FUNCTION button for 3 seconds to activate the
child lock. While activated the lock LED will illuminate, and the buttons on the
FUNCTION
control panel are deactivated. To turn off the lock, press and hold the
FUNCTION button for 3 seconds.
SWING Button
Press to select the position of the louvre on the top of the unit. This can either
be set at a 45 or 90 degree angle. Alternatively the swing function can be
activated which changes the position of the louvre toalter the direction of the
SWING
airflow.
INTELLIGENT DEFROST
The appliance will defrost automatically when the coil sensor detects that the
internal temperature is too low. During defrosting the indicator will light up.
DEFROST
Once the defrost cycle has finished, the appliance will return to the mode that
was previously operating.
TANK-FULL
When the water tank is full, the TANK FULL indicator light will flash, and the
TANK FULL
unit will stop operating. Once emptied and replaced, the appliance will
resume operation.
OPTIONAL CARBON AND HEPA FILTERS (Air purification function)
Insert the filters into the filter housing. It is suggested to hoover the filters
every 2-3 weeks and change them every 3-6 months as this will help to
ensure the room is kept fresh and odour free.
8