Troubleshooting; Major Faults - Harmar Mobility PINNACLE SL300 Series Installation & Service Manual

Hide thumbs Also See for PINNACLE SL300 Series:
Table of Contents

Advertisement

SECTION 5

TROUBLESHOOTING

If the lift does not operate, diagnose the
problem by listening to the beeps emitted.
An intermittent beep for 30-seconds indicates
that the lift has been stopped off the charge
station. This repeats every 5 minutes until
the lift is returned to the charge station. It is
recommended that the lift be immediately
moved to a charge strip station located at
either end of the rail.

MAJOR FAULTS

Runaway
No Power
*Conflicting switches FOOTREST UP and FOOTREST DOWN
*Conflicting switches OBSTRUCTION UP and OBSTRUCTION DOWN
*Conflicting switches FOOTREST DOWN and OBSTRUCTION UP
*Conflicting switches FOOTREST UP and OBSTRUCTION DOWN
Conflicting switches STOP UP and STOP DOWN switches both detected
Conflicting switches STOP UP and STOP DOWN switches both NOT detected
* If configured for your model.
PINNACLE STAIRLIFT: SECTION 5
TROUBLESHOOTING
If the beep codes are not able to be cleared
and the lift is not working, please contact
Harmar technical support.
If no light shows on the charger, a problem with
the AC power adapter may be present. Please
contact Harmar technical support.
SL300 PINNACLE STAIRLIFT:
26MAY2022 | 630-00100 J
Number of Beeps
1
2
3
4
5
6
7
8
Install Manual
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pinnacle sl300Pinnacle sl300fr

Table of Contents