Receiving Faxes Automatically: Fax Only Mode; Setting Fax Only Mode - Canon MULTIPASS C75 User Manual

Receiving Faxes Automatically: FAX ONLY MODE

If you have a separate telephone line for your unit, set FAX ONLY MODE for the unit to
answer all calls as fax calls.

Setting FAX ONLY MODE

Your unit is factory-set to FAX ONLY MODE. If you have not changed the receive mode
to Fax/Tel Mode or NET SWITCH*, simply follow this procedure:
1
Press Receive Mode to select FAX ONLY MODE.
• After a few seconds, the LCD changes to this
display:
If FAX ONLY MODE does not appear in the LCD when you press Receive Mode, follow
this procedure to set this mode:
1
Press Function.
2
Press Data Registration.
3
Press Set.
Use d or u to select RX SETTINGS.
4
5
Press Set.
Use d or u to select RX MODE.
6
7
Press Set.
Use d or u to select FAX ONLY MODE.
8
9
Press Set.
* NET SWITCH is only available in Australia and New Zealand.
Chapter 8
FAX ONLY MODE
Ex:
15:00 FaxOnly
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX/TEL AUTO SW
FAX ONLY MODE
INCOMING RING
Receiving Faxes
8-3