Table of Contents
Advertisement
6
Refer to the appropriate table (1 following
pages) and use these guidelines to select
and register settings:
Use d or u to scroll through the settings.
To register a setting or access sub-settings,
press Set.
To return to a previous level, press Data
Registration.
• For your settings to be registered, be sure to
press Set after making a selection or entering
information.
• If at any stage you wish to return to standby
mode, press Stop.
• If you pause for more than 60 seconds while
accessing a menu, the unit will automatically
return to standby mode.
7
When you are finished, press Stop to
return to standby mode.
Chapter 14
Ex:
15:00
FaxOnly
Summary of Settings
14-3
Advertisement
Table of Contents
