Table of Contents
Advertisement
Removing Shipping Materials
Follow this procedure to remove the shipping materials. Keep them in case you need to
transport the unit in the future:
1
Remove the
shipping tapes
from the top of
the unit.
3
Open the document tray*, then
remove the shipping tapes and
protective sheet.
5
Open the printer cover, then remove
the shipping tape from the side of the
unit.
Close the printer cover and document
tray.
n
The actual shipping materials may differ in shape, quantity, and position from the ones
shown above.
* For Hong Kong, Singapore, and Malaysia, the unit comes with the document tray already attached.
Chapter 2
2
Remove the
protective piece
from the multi-
purpose tray.
4
Open the operation panel
partially by gently pulling it
towards you (it only opens
slightly). Then remove the
protective sheet from the ADF.
Close the operation panel by
pressing it down from the
centre until it locks into place.
2-3
Setting Up
Advertisement
Table of Contents
