Cleaning and care
Cleaning the contacts on the drip
tray
Clean the contacts (metal discs) and
the space between them carefully,
e.g., using a brush.
Dry all parts thoroughly.
The contacts will not be able to detect
that the drip tray is full if they are
damp or dirty.
Check the contacts and the area
around them once a week.
Reassembling the drip tray
Attach the drip tray lid as follows:
slide the lid under the lug next to the
contacts and apply pressure to the lid
until the catches at the sides audibly
click into place.
56
Place the grounds container on the
lid.
Push the drip tray and grounds
container back into the coffee
machine.
Close the appliance door.
Cleaning the drip tray cover
Clean the drip tray cover on a daily
basis.
Remove the drip tray cover as
follows: apply pressure to the rear
edge so that the cover tips forward
and you can remove it easily.
Clean the drip tray cover by hand
using a mild solution of warm water
and liquid dish soap.