Changing The Length For Satin Stitches; Realigning The Pattern - Brother Innov-ís 1000 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Changing the length for satin
stitches
The length for one satin stitch can be changed in five
gradations.
a Press
panel, and select
b Select a satin stitch pattern.
Press
c
It turns to
(Utility stitch key) on the display
(Satin stitch).
.
and the pattern is longer.
Each time you press it the number changes.
You can select from

Realigning the pattern

The pattern may not be sewn correctly, depending on
the type of fabric being sewn or the sewing speed. If
this occurs, adjust the pattern while sewing on a
piece of scrap fabric that is the same as that used for
your project.
a
Attach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 42).
b Press (Utility stitch key) on the display
panel, and select
The screen containing the various decorative
stitches appears.
Sewing the Various Built-in Decorative Patterns 117
- .
(Decorative stitch).
3