Setup Send; Before You Begin; Using The Adf (Automatic Document Feeder) - Brother FAX-4100 Owner's Manual

6

Setup Send

6

Before You Begin

Before you begin sending faxes, please be sure to read all the instructions and
cautions listed below for placing originals in the automatic document feeder.

Using the ADF (Automatic Document Feeder)

I
Documents must be between 5.8 and 8.5 inches wide between 3.9 and 14.1
inches long. Your machine can scan an image only 8.15 inches wide, regardless
of how wide the paper is.
I
Fan the pages before
placing them in the ADF.
I
Make sure you insert
documents face down, top
edge first.
I
Adjust the paper guides to
fit the width of your
document.
I
The ADF (automatic
document feeder) can hold up to 30 Pages, feeding each one individually
through the machine. If you "Stagger" the pages, the ADF can hold up to 50
pages. Use standard (17 lb–24 lb) paper when using the ADF. If you're using
heavier paper, feed each sheet individually to prevent paper jams.
DO NOT use curled, wrinkled, folded or ripped paper, or paper with staples,
paper clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric.
I
Make sure documents written in ink are completely dry.
I
Before you send a fax press Resolution to select the resolution for the
document you're sending. (See
If you send faxes from a computer on the same phone line and your Brother
machine intercepts them, set Easy Receive to OFF.
, Page 6-5.)
Fax Resolution
S E T U P S E N D
6 - 1