Setup Send; Before You Begin - Brother FAX4750 Service Manual

6
6

Setup Send

Before You Begin

Documents must be between 5.8 and 8.5 inches wide, and 3.9 and 14.1
inches long. Your machine can scan an image only 8.15 inches wide,
regardless of how wide the paper is.
Make sure you insert documents face down, top edge first.
Adjust the paper guides
to fit the width of your
document.
The MFC 8300's ADF (automatic document feeder) can hold up to 30
pages, feeding each one individually through the machine. Use standard
(17 lb–24 lb) paper when using the ADF. If you're using heavier paper,
feed each sheet individually to prevent paper jams.
The FAX 4750 and MFC 8600's ADF can hold up to 50 pages if you
stagger the pages and meet the following conditions:
Temperature:
Humidity:
Paper:
Fan the paper, then stagger
the pages in the document
feeder as shown below:
DO NOT use curled, wrinkled, folded or ripped paper, or paper with
staples, paper clips, paste or tape attached. DO NOT use cardboard,
newspaper or fabric.
Make sure documents written in ink are completely dry.
Press
Resolution
document you're sending. (See Resolution, page 6-8.)
68°F – 86°F (20°C – 30°C)
50% – 70%
Xerox 4200 (20LB/LTR),
(before you send the fax) to select the resolution for the
S E T U P S E N D 6 - 1