Cable Storage - Dimplex FutuRad FutM2BT Manual

Assembly
WARNING: The radiator must only be operated with the wheels and castors securely fitted and in the upright
position.
WARNING: The radiator is heavy – ensure that it is supported to prevent it from toppling. Ask a second person
to help with this if necessary.
•
Open the packaging and remove the product.
•
Turn the radiator upside down on a carpet or other soft surface to avoid damage
•
Fit the castors in position and secure using the wing bolts provided. There are alignment guides to ensure the
correct positioning and orientation of the castor plate.
•
Return the radiator to the correct orientation so it rests on the castors.
•
The product is now ready for use, always ensure the product is on a flat stable surface when in use.

Cable Storage

•
There is a cable storage compartment located at the bottom of the control panel,
•
To access the cable storage box, pull the cable storage box door to open,
•
When the product is not in use neatly coil the cable around the outside of the storage box and position the plug
in the centre. The storage box door can then be closed,
•
While the product is in operation, the cable must be fully uncoiled. The cable should be positioned towards the
bottom of the cable wrap box so the door can be closed.
•
The cable can be positioned to exit the product from the left or right hand side.
WARNING: The supply cord must be fully uncoiled before use.