Table of Contents
Advertisement
Quick Links
FutM2BT & FutM3BT
As with all portable heating appliances: This product is suitable only for well insulated spaces or occasional use.
08/54883/0 Issue 2
These products comply with all the required European and UK Product Safety, Electromagnetic Compatibility and Environmental Standards. They
are fully compliant with the LVD, EMC, RoHS and Eco Design Directives and Regulations.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dimplex FutuRad FutM2BT
Summary of Contents for Dimplex FutuRad FutM2BT
- Page 1 FutM2BT & FutM3BT As with all portable heating appliances: This product is suitable only for well insulated spaces or occasional use. 08/54883/0 Issue 2 These products comply with all the required European and UK Product Safety, Electromagnetic Compatibility and Environmental Standards. They are fully compliant with the LVD, EMC, RoHS and Eco Design Directives and Regulations.
-
Page 2: Important Safety Advice
Important Safety Advice IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY BEFORE USE AND RETAINED FOR FUTURE REFERENCE should be kept away unless continuously supervised. WARNING: To avoid danger of suffocation please Children aged from 3 years and less than 8 years remove all packaging materials particularly plastic shall only switch on/off the appliance provided and EPS and keep these away from vulnerable... - Page 3 DO NOT operate the radiator with the mains lead to this heater, therefore cut off the plug. When cut off overhanging the outlet grille. this plug can constitute a shock hazard if inserted into If the radiator is tipped over, unplug it and allow it to a socket outlet.
-
Page 4: Cable Storage
Assembly WARNING: The radiator must only be operated with the wheels and castors securely fitted and in the upright position. WARNING: The radiator is heavy – ensure that it is supported to prevent it from toppling. Ask a second person to help with this if necessary. -
Page 5: Operation
Operation Before using the heater ensure that all warnings and instructions have been read carefully. IMPORTANT: Objects or clothing must not be placed on the appliance. IMPORTANT: Do not operate unless the castors have been securely fitted. IMPORTANT: The element has been coated with a protective film which will burn off during the first few minutes of use and may cause a small amount of fuming. - Page 6 Standby & Power Up When the appliance is plugged in there will be an audible beep and the unit will enter 'Standby' mode. The appliance is now energised and ready for use. Standby Press the button to turn the product First time start-up? On first time start-up the product will start with the On subsequent start-ups the product will return to the...
-
Page 7: Operational Modes
Remote Operation & Wireless Connectivity The appliance can be controlled remotely using a smart phone or similar device. To facilitate this remote operation, it is necessary to first download the Dimplex app. The App is available on both Android and IOS devices and is available free from the Apple or Android App store. -
Page 8: Setting The Time And Day
Programming Setting the Time and Day • If it is the first time start up the appliance will automatically enter the time setting menu if the buttons are pressed. • To reset/ modify an already set time, press and hold key for two seconds, the digits form 1 to 7 representing week days will begin flashing, select the current day using the keys (1 corresponds to Monday, 2 to... -
Page 9: Mode Selection
Setting the ‘Desired’ Room Temperature The temperature is set using the temperature increase and temperature decrease buttons. The room temperature can be set in the range between 5°C to 30°C. Please note the temperature indicated on the display represents the desired room temperature. - Page 10 Boost Mode Setup • To select Boost mode, navigate to the mode using the key and confirm selection using the Key. • Highlight the desired Boost duration, 30, 60 or 120 minutes, using the keys and confirm the selection by pressing the key.
- Page 11 Setting a Heating Schedule, • Press the button. The weekdays numbered 1-7 will be displayed at the top of the screen with the active day flashing. • Use the keys to select the required day and confirm selection using the key.
- Page 12 Copy & Pasting Day Schedules It is possible to copy a day schedule to any other day, to all week days collectively or to all weekend days collectively. To copy a day schedule: • In the Program, day select setup screen, highlight the day you wish to copy. Use the buttons to navigate to the desired day.
-
Page 13: Temperature Units
Key Lock To activate the key lock: • Press and hold both buttons together for 2 seconds. • The Key Lock icon will appear on the display. Press & hold • To unlock the control repeat the action by pressing both buttons for 2 seconds. -
Page 14: Tilt Switch
Type of heat output/ room temperature control With electronic room temperature control Contact details UK: Glen Dimplex UK Ltd., Millbrook House, Grange Drive, Hedge End, Southampton SO30 2DF ROI: Glen Dimplex Europe Limited, Airport Road, Cloghran, County Dublin, K67 VE08... - Page 15 If you are a consumer and you experience a problem with your Dimplex product, which is found to be defective due to faulty materials or workmanship within the Guarantee Period, this Dimplex Guarantee will cover repair or - at the discretion of Dimplex –...
- Page 16 Glen Dimplex Heating & Ventilation, Grange Drive, Hedge End, Southampton SO30 2DF Telephone: 0344 879 3588 Visit: www.dimplex.co.uk [c] Glen Dimplex All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex.
Need help?
Do you have a question about the FutuRad FutM2BT and is the answer not in the manual?
Questions and answers
I have no display on screen when switched on, nothing happens, been working fine previously - Dimplex Futurad Futm3
The display on the Dimplex FutuRad FutM2BT may not be visible if the unit has entered Sleep Mode. If no buttons have been pressed for approximately 20 seconds, the display and buttons enter sleep mode, with only selected screen icons remaining visible at 50% brightness. To reactivate the display and buttons, place your hand on the display.
This answer is automatically generated