Removal Of Drive Wheel From Wheelchair Base - Sunrise Medical Quickie Q50R Service Instructions Manual

R
emoval of drive wheel from wheelchair base
Preparation
Note! Switch off the wheelchair via remote control
Instructions
Note! Suitable work area required!
• Follow the illustrated instruction for removing the drive
wheel from the wheelchair base
• Rebuild the wheelchair in reverse order once completed.
Fig. 6.2.14
1. Remove the 3 (A) screws from the centre of the drive wheel
Tightening torque for (A) bolt is 30Nm.
Fig. 6.2.15
2. Remove drive wheel (B) from base
17
Tools used
Q50R REV.A