Table of Contents
Advertisement
1. Before Using RICOH PJ Interactive Kit Type3
6.
Adjust the angle of the sensor so the projected image fits within the blue frame.
Adjust brightness of the sensor when the projected image is blurred.
Adjust the camera angle by using the hexagon wrench to make the bottom of the projected image
as close to the bottom of the blue frame as possible.
7.
Click [Finish].
8.
Click [Alignment] under "STEP 2 Alignment".
9.
Click [Auto Alignment].
• Returns to previous screen if successful.
• If it fails, an error message is displayed. Try again.
18
Y0E5IX0037
Y0E5IX0078
Advertisement
Table of Contents
