Table of Contents
Advertisement
10.
When Auto Alignment fails, click [Manual Alignment].
Follow the instructions on the screen. You will touch the center of 25 adjustment marks in total with
the interactive pen.
11.
Click [Start IWB Lt] under "STEP 3 Start Handwriting Software".
The RICOH PJ Interactive Setup Software closes automatically, and then RICOH Interactive
Whiteboard Lt will start. Then, you can directly operate the computer display on the projected
screen with the interactive pen.
• You cannot operate the computer display with the interactive pen when RICOH PJ Interactive Setup
Software is still running.
• Due to fluctuations in brightness, Auto Alignment may work less precisely immediately after turning
the projector on. Wait at least two minutes after turning on the projector to perform Auto Alignment.
• Avoid approaching the projector during Auto Alignment.
• If the projected screen is receiving external strong light, Auto Alignment may not work normally.
Keep the projected screen away from direct light.
Preparations for Using the Interactive Function
Y0E5IX0077
19
Advertisement
Table of Contents
