After Finishing Operations Of The Machine - Canon IR1600 Reference Manual

2
Enter the Password, and press
DAC PASSWORD
When you press
100% AUTO PAPER
1
TEXT
NOTE
If the Department ID and/or Password that you entered are wrong, the beep sounds. Repeat the procedure from step
1.
If you made a mistake when entering the Password, press
For details about the Department ID Management, see "Setting the Department ID Management," on p. 4-5.

After Finishing Operations of the Machine

1
When your operations are completed, press
The display for entering the Department ID and Password appears.
ENTER DAC
NOTE
To perform operations again, enter the Department ID and Password.
If you do not press
which you previously entered.
The display for entering the Department ID and Password automatically appears after the specified time has elapsed,
even if you forget to press
1-22 Entering the Department ID and Password
.
, the standby display appears.
_
after finishing your operations, any subsequent copies will be totaled under the Department ID
ID
after finishing your operation. (See "Setting the Auto Clear," on p. 3-16.)
ID
01
(Clear), and enter the correct value.
C
.
ID